Hot Dipped Galvanised Steel
What is Hot Dipped Galvanised Steel?
Hot Dipped Galvanised Steel is steel coated with a layer of zinc. Steel sheets are immersed in a bath of molten zinc at a temperature of around 450 °C to form a plated layer.
What are the Advantages of Hot Dipped Galvanised Steel?
Galvanised steel is a popular option for creating a corrosion resistance finish that is less costly than stainless steel. Galvanising is also a more environmentally friendy option for preventing steel from corroding.
Our Hot Dipped Galvanised Steel Sheets are available in the thicknesses and sheet sizes in the table below with no minimum quantity.
Hot Dipped Galvanised Steel Sheet Sizes
BS EN 10346:2015 DX51D-
| 2000mm x 1000mm | 2500mm x 1250mm | 3000mm x 1500mm | Coil 1500mm | |
|---|---|---|---|---|
|
0.8mm |
|
|
|
|
|
0.9mm |
|
|
|
|
|
1.0mm |
|
|
|
|
|
1.2mm |
|
|
|
|
|
1.5mm |
|
|
|
|
|
2.0mm |
|
|
|
|
|
2.5mm |
|
|
|
|
|
3.0mm |
|
|
|
|
Maximum chemical composition for flat and long products of steel grades % by mass
| Carbon (C) | Silicon (Si) | Manganese (Mn) | Phosphorus (P) | Sulphur (S) | Titanium (Ti) |
|---|---|---|---|---|---|
|
0.12 |
0.5 |
0.6 |
0.1 |
0.045 |
0.3 |
| Yield Strength (Re) Min | Tensile Strength (Rm) | Elongation Min |
|---|---|---|
|
Unspecified |
250-500 MPa |
22% |
